Secondary Raw Materials

"Copper com" d.o.o buys raw materials such as:

Copper Scrap

I
CLASS
1. Copper sheets and strips of a thickness exceeding 2.0 mm
2. Peeled ropes (without insulation and lack) made of copper wire in diameter over 1.0 mm
3. Heavy wall tubes with wall exceeding 2.0 mm
4. Press scrap
5. Copper rod over 3.0 mm in diameter
II
CLASS
1. Copper tube wall thickness of 0.5 - 2.0 mm
2. Copper sheet or strip thickness of 0.5 - 2.0 mm
3. Copper rod or wire diameter of 1.0 - 2.0 mm
4. Copper bar with a thickness of 1.0 - 3.0 mm
III
CLASS
1. Enameled wire
2. Peeled stranded wire ropes of diameter less than 0.5 mm
3. Wire coated with tin, nickel, zinc, regardless of the dimension
4. Copper swarf with max 2% of oil, water, emulsions.

Brass Scrap

1 A clean industrial metal scrap or unused materials from alloys CuZn28-CuZn37, made from sheets, plates, strips, tubes, wires, rods, etc...
2 Clean industrial scrap from alloys CuZn36 Pb1-39 1.0 - 3.5 derived from pressed and extruded products without coating. This includes scrap and ingots weighing up to 30 kg max
3 Ammunition cartridge cases - large alloy CuZn28-30
4 Ammunition cartridge cases - small alloy CuZn28-30
5 Collecting brass from consumer scrap
6 Collecting brass - old reinforcement bars and fittings
7 Brass swarf from automatic brass CuZn36 Pb1.0-39-3.5% and small wire and rod cuts. Allowed the presence of up to 2% max oil, water, emulsions with a maximum of 1% iron chips.